描述

Electric Stencil Cleaning Machine

Features:

1.Automatic cleaning mode: the stencil is thrown up and down, while the high pressure spray system sprays the heating cleaning fluid, so that the stencil can be cleaned, rinsed and dried automatically in all directions;

2.Visualization of the whole process: Visual window and LED light device, cleaning process at a glance;

3.The most scientific nozzle design (patent): the use of about 8 spray arm distribution — completely solve the cleaning blind area, spray arm, nozzle can be disassembled;

4.Visualized nozzle pressure can be adjusted: it solves the problem of collision and splash of small workpiece size when it is sprayed with high pressure during cleaning;

5.Photoelectric sensor installed in the window and stencil entrance to protect personal safety, standard diluent tank \ rinsing tank heating system, greatly improve the cleaning efficiency. Reduce cleaning time;

6.Comprehensive cleaning system: compatible with running water washing or chemical cleaning, for SMT; THT PCBA after welding surface residual rosin, water-soluble flux, no-cleaning flux/solder paste and other organic and inorganic pollutants to thoroughly and effectively clean;

7.Machine material: 304 stainless steel, acid resistance, alkaline and other cleaning fluid;

8.Open/closed loop mode can be selected for rinsing. The built-in filter device can realize the recycling of solvent and reduce the amount of solvent;

9.Has emergency stop button, leakage protection function in case of failure;

10.Lower operating cost: The built-in filter device can realize the recycling of solvents and reduce the consumption of solvents. At the end of cleaning, compressed air blowing mode is adopted: the residual liquid in the pipeline and pump is recovered, which can effectively save 50% of the cleaning agent.

Result:

Specifications: